26■ Local/Remote Setting(LOCAL/REMOTE)• Move the cursor to LOCAL/REMOTE, and select LOCAL orREMOTE by moving the joystick to the right or left.The factory default setting is LOCAL.Note: The REMOTE mode does not work when the WV-RM70,WV-CU360, WV-CU161, WJ-FS616 or WV-CU550 series isconnected. Make sure that LOCAL mode is selected in thiscase.■ Special 1 Menu Setting (SPECIAL 1)● Privacy Zone (PRIVACY ZONE)Up to 8 unwanted zones can be masked on the monitor screen.1. Move the cursor to PRIVACY ZONE and select ON (ENB) or OFF(ENB) by moving the joystick to the right or left. Press the CAM(SET) key to display the ZONE NUMBER setting menu.The factory default setting is OFF (ENB).ON (ENB): Preset privacy zones are veiled on the monitor screen.OFF (ENB): The veiling function does not work.Note: If ON(DIS) or OFF(DIS) appears for PRIVACY ZONE, thesteps from 2 onward are not applicable. Select OFF for PASS-WORD LOCK to take the following steps.2. Select a zone number by moving the joystick to the right or left,and press the CAM (SET) key.• A zone number followed by * (asterisk) indicates that the zonehas already been registered.• When a zone number having no * is selected, the picture iszoomed out fully.• When a registered zone number is selected, the cameramoves to the preset position. Note that if you move PAN/TILT,ZOOM/FOCUS or ZONE SCALE in that position, the regis-tered zone number having “*” is cancelled.• The zone frame appears in the centre of the screen if 3 orfewer mask areas exist in that picture and if the zone numberis not registered yet.• The privacy zone may appear on the monitor screen depend-ing on the direction of the camera.• The privacy zone function will not work at start-up immediate-ly after turning the power on.** SPECIAL 1 **PRIVACY ZONE OFF(ENB)PROPO.P/T ONAREA TITLE ON(USER)PATROL STOPALARM IN/OUTPASSWORD LOCK OFFCLEANING OFFEL-ZOOM ONPRESET ALM OFFIMAGE HOLD OFFRETSpecial 1 menu** ZONE NUMBER 1*/8 **RETZONE NUMBER setting menu** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UPOFFOFFOFFAUTO PANONLOCALSetup menu** ZONE NUMBER 1*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETZONE SCALE ••••|••••SET DEL – +RETZONE setting menu** ZONE NUMBER 1*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETZONE SCALE ••••|••••SET DEL – +RETZONE setting menu