Panasonic WV-CW860 Operating Instructions Manual

Panasonic WV-CW860 Operating Instructions Manual Manual pdf 24 page image

25** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UPOFFOFFOFFAUTO PANONLOCALSetup menu■ Auto Pan Key Setting(AUTO PAN KEY)This is used for assigning one of the following auto functions to theAUTO key on the controller. Pressing the AUTO key activates theassigned function after this setting.• Move the cursor to AUTO PAN KEY and select an auto function bymoving the joystick to the right or left.The factory default setting is AUTO PAN.Mode changes as follows:AUTO PAN: Assigns the auto panning function to the key.SEQ: Assigns the sequence function to the key.SORT: Assigns the sort function to the key.PATROL: Assigns the patrol play function to the key.Note: Auto pan LED on the controller does not light if a functionother than the auto pan function is assigned. The auto panfunction cannot be stopped with the AUTO PAN key.■ Digital Flip Setting (DIGITAL FLIP)• Move the cursor to DIGITAL FLIP and select ON or OFF by mov-ing the joystick to the right or left.The factory default setting is ON.OFF: Tilt range is limited from 0 ° to 90 °.ON: The digital flip function allows the tilt angle to widen up to180 °. The image on the monitor screen is flipped horizontallyand vertically at the tilt angle of approx. 135 ° (If the camera isinstalled on a ceiling).Note: Tilt range narrows from 180 ° to 90 ° if PAN LIMIT is set toON.Notes:• Digital flip functions while moving the joystick downwards. In caseof moving the joystick to other directions, it does not function.• When OFF is selected for DIGITAL FLIP, the following operationsare required to move the camera 180 ° vertically.1) Move the joystick downwards to aim the camera down.2) Move the joystick to the right or left to rotate the camera 180 °horizontally.3) Move the joystick upwards.• To set preset position directly from the WV-CU360, WV-CU550Bor WV-CU161 System Controller, it is temporarily required settingboth the electronic zoom function and digital flip function to OFF.Tilt range setting is disabled between 90 ° and 180 °.AUTO PAN SEQ SORTPATROL** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UPOFFOFFOFFAUTO PANONLOCALSetup menu