• When using the server certificate:In advance, install the root certificate and intermediate certificate on the browser in use. Follow theinstructions of CA for information on how to obtain and install these certificates.10.4 Access the microphone using the HTTPSprotocol1. Start up the web browser.2. Enter the IP address of the microphone in the address box of the browser.• Example of entry: https://192.168.0.10/IMPORTANT• When the HTTPS port number is changed from “443”, enter “https://IP address of the microphone+ : (colon) + port number” in the address box of the browser.(Example: https://192.168.0.11:61443)• When the microphone is in a local network, configure the proxy server setting of the web browser(under [Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the localaddress.3. Press the [Enter] key on the keyboard.→ The “Live” page will be displayed.When the security alert window is displayed, install the security certificate. (®page 50)When “On” is selected for “User auth.”, the authentication window will be displayed before displayinglive images for the user name and password entries.IMPORTANT• When the microphone is accessed using the HTTPS protocol, the refresh interval and frame rateof images may be lower.• When using the HTTPS protocol, up to 2 users can access the microphone and receive audio dataconcurrently.10.4.1 Install the security certificateWhen the security certificate of the microphone to access is not installed on the PC, the security alert windowwill be displayed each time the microphone is accessed using the HTTPS protocol. To have the security alertwindow not displayed, it is necessary to install the security certificate in the following procedure. If the certificateis not installed, the alert window will be displayed each time the microphone is accessed.Note• The security certificate is installed on the PC with the information registered for “Common Name”.Therefore, the information registered for “Common Name” must be same as the address or host namefor the microphone access. If the certificate is not the same, the security alert window will be displayedeach time the microphone is accessed.• When the address or host name of the microphone is changed, the security alert window will bedisplayed each time the microphone is accessed even if the security certificate is installed. Install thesecurity certificate again.• When the microphone access is open to the Internet, enter the address name or host name to accessvia the Internet for “Common Name”. In this case, the security alert window will be displayed each timethe microphone is locally accessed, even if the security certificate is installed.Operating Instructions 4910 Configuring the network settings [Network]