• [Image compression rate upon alarm detection]Click “Image compression rate upon alarm detection >>” to display the setup menu that can configure thesettings relating to image quality when an alarm occurs. The setup menu will be displayed in a newlyopened window. (®page 120)• [Alarm E-mail notification]Click “E-mail server >>” to display the setup menu that can configure the settings relating to E-mailnotification when an alarm occurs. The setup menu will be displayed in a newly opened window.(®page 121)• [Alarm image FTP transmission]Click “FTP >>” to display the setup menu that can configure the settings relating to FTP transmission whenan alarm occurs. The setup menu will be displayed in a newly opened window. (®page 122)• [Alarm image recording(SD memory card)]Click “SD memory card >>” to display the setup menu that can configure the settings relating to recordingimages on an SD memory card when an alarm occurs. The setup menu will be displayed in a newly openedwindow. (®page 123)• [Panasonic alarm protocol]Click “Panasonic alarm protocol notification >>” to display the setup menu that can configure the settingsrelating to transmitting Panasonic alarm protocol notifications when an alarm occurs. The setup menu willbe displayed in a newly opened window. (®page 124)• [HTTP alarm notification]Click “HTTP alarm notification >>” to display the setup menu that can configure the settings relating totransmitting HTTP alarm notifications when an alarm occurs. The setup menu will be displayed in a newlyopened window. (®page 125)13.4.1 Configure settings relating to image quality on alarm actionClick “Image compression rate upon alarm detection” of “Camera action on alarm” on the [Alarm] tab of the“Alarm” page. (®page 119)[Image compression rate upon alarm detection]Select “On” or “Off” to determine whether or not to change the image quality of “Quality1” (®page 84) uponalarm detection.• On: Images will be transmitted with the image quality selected for “Image quality upon alarm detection”.• Off: Does not change the image quality upon alarm detection.• Default: Off[Image quality upon alarm detection]Image quality can be changed upon an alarm occurrence. Select the image quality from the following.0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low• Default: 5 Normal120 Operating Instructions13 Configure the alarm settings [Alarm]
