10.5.4 Installation of the certificate issued by CAIMPORTANT• If the CSR file is not generated, it is impossible to install the certificate (security certificate) issued byCA.• For the installation, the certificate issued by CA is required.1. Click the [Browse...] button of “CA Certificate - Certificate install”.→ The [Open] dialog box will be displayed.2. Select the certification file and click the [Open] button. Then, click the [Execute] button.→ The certification will be installed.Note• The host name registered in the installed certificate will be displayed on “CA Certificate -Information”. Depending on the status of the certificate, the following are displayed.Indication DescriptionInvalid The server certification is not installed.[Host name of the certificate] The certificate has already been installed andvalidated.Expired The certification has already expired.• When the [Confirm] button is clicked, the registered information of the installed certificate will bedisplayed in the “CA Certificate - Confirm” dialog box. (Only “Organizational Unit” will be displayedwith an asterisk (*).)• When the [Delete] button is clicked, the installed server certificate will be deleted.• When “On” is selected for “Alteration detection information addition”, it is impossible to delete thecertificate issued by CA.• To change (or update) the certificate issued by CA, perform step 1 and 2.IMPORTANT• Before deleting the valid certificate (security certificate), confirm that there is a backup file on the PCor another media. The backup file will be required when installing the certificate again.• The expiration date of the certificate issued by CA can be checked by double-clicking the servercertification file issued by CA.68 Operating Instructions10 Configure the basic settings of the camera [Basic]
