11.6 Configure the back focus setting (“Backfocus” setup menu) (WV-SP509/WV-SP508)Click the [Setup>>] button of “Back focus” on the [Image quality] tab of the “Image/Audio” page. (®page 90)The focus is adjusted by moving the MOS sensor in the camera to the optimal position.Manual and auto adjustments are available.The auto back focus function also allows users to correct out of focus images when changing between colorand black & white images.[Auto back focus]The auto back focus function starts to automatically adjust back focus based on a subject located in the centerof the screen by clicking the [Execute] button.[Focus]The back focus can be adjusted manually.• [Near] button: Click this button to adjust the focus to the “Near” side.• [Reset] button: Click this button to reset the focus to the default.• [Far] button: Click this button to adjust the focus to the “Far” side.[Adjusting method]Select the back focus adjustment method upon switching between the color mode and the black & white mode.• Auto: Adjusts the back focus function automatically and corrects out of focus when switching betweencolor and black & white images.• Preset: Performs the preset movement to each specified back focus position when switching betweencolor and black & white images. The preset position is the back focus position specified last time, whichwas automatically memorized for each of color images and black & white images.• Fix: Fixes the position after adjusting the back focus either automatically or manually.• Default: Auto[Close] buttonClick this button to close the “Back focus” setup menu.102 Operating Instructions11 Configure the settings relating to images and audio [Image/Audio]
