• When “Fix shutter” is selected, overexposure may occur in bright conditions (when there is 60,000 lxor more). In this case, increasing the shutter speed can reduce overexposure.[AGC]Select a method of gain adjustment from the following.• On(High)/ On(Mid)/ On(Low): When the luminance of the subject becomes darker, gain will beautomatically increased and screen will become brighter. “High”, “Mid” and “Low” are indications of gainlevel.• Off: Images will be captured with the fixed gain level.• Default: On(High)[Auto slow shutter]The electronic sensitivity enhancement (sensitivity up) can be carried out by adjusting the storage time of thesensor.The following are available for the recording duration.Off(1/30s), Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s• Default: Off(1/30s)IMPORTANT• When “On” is selected for “Auto slow shutter”, frame rate may become lower. Noise or white dots(blemishes) may sometimes appear.Note• When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16.• When “Off” is selected for “AGC”, this setting is unavailable.[Day & Night(IR)]Select switching between the color mode and the black & white mode from the following.• Off: The color mode is selected.• On: The black & white mode is selected.• Auto1(Normal): The camera automatically switches between the color mode and the black & white modein accordance with picture brightness (luminance). The black & white mode will automatically be selectedwhen the lighting condition becomes darker, while the color mode will automatically be selected when itbecomes brighter.• Auto2(IR Light): Suitable when using near-infrared light source at night.• Auto3(Super Chrome Compensation(SCC)): Suitable to keep the color mode even under darker lightcondition. The color mode will be carried on by the Super Chrome Compensation (SCC) function evenunder illumination that is lower than Auto1(Normal).• Default: Auto1(Normal)Note• The operating sound might be heard when changing to black-and-white mode, however it does notindicate any malfunction.• Since the color compensation technology is used for Auto3(Super Chrome Compensation(SCC)),some colors may look different from the actual objects depending on the light condition.[Level]Select the threshold illuminance level (brightness) to switch between the color mode and the black & whitemode.The descriptions about the following threshold illuminance levels are given when “Off” is selected for “SuperDynamic(SD)”.When “Day & Night(IR)” is set to “Auto1(Normal)” or “Auto2(IR Light)”Operating Instructions 10511 Configure the settings relating to images and audio [Image/Audio]
