The Patrol function can be configured to learn pan, tilt, zoom, focus, and brightness settings and operations,and then use these learned settings and operations to operate the camera.Patrol setting[Number of patrol pattern]Select the patrol pattern number. The length of patrol patterns that can be learned differs depending on thepattern number.• 1: 2 minutes of operations can be learned for Patrol 1.• 2: 1 minute of operations can be learned for both Patrol 1 and Patrol 2.• 4: 30 seconds of operations can be learned each for Patrol 1, Patrol 2, Patrol 3, and Patrol 4.• Default: 1Note• When the number of control patterns is changed, the learned patrol operations are deleted.[Learn patrol pattern]Click [ ] of “Patrol No.” and select a patrol number (1-4) from the pull-down menu. An asterisk (*) next to thepatrol number indicates that the patrol operation has already been learned for the patrol number.With the patrol number selected, click the [Learn] button to start learning the camera operations. Duringlearning, “LEARNING (***S)” is displayed on the screen. “***S” is the length of possible learning time remaining.Click the [Stop] button to stop learning and replaying camera operations. When the remaining time is zeroseconds (OS), operations are automatically stopped.With the patrol number selected, click the [Confirm] button to replay the learned camera operations.Operating Instructions 11711 Configure the settings relating to images and audio [Image/Audio]
