10The screws and bolts must be tightened tothe specified torque.Failure to observe this may cause a dropresulting in injury or accidents.Turn the power off when do wiring of thisproduct.Failure to observe this may cause electricshock. In addition, short circuit or wrong wiringmay cause fire.Install this product in a location highenough to avoid people and objects frombumping the product.Failure to observe this may cause injury.The measures of protection against a fallof this product shall be taken.Failure to observe this may cause a dropresulting in injury or accidents.Be sure to install the safety wire.Do not install this product in locationssubject to vibration.Loosening of mounting screws or bolts maycause a fall of the product resulting in injury oraccidents.Correctly perform all wiringShort circuits in the wiring or incorrect wiringmay cause fire or electrical shock.The measures of protection against snow-fall shall be taken.Weight of snow may cause a fall of the productresulting in injury or accidents.Protect the product against snowfall by install-ing it under eaves.Turn the power off when cleaning thisproduct. X 8570Failure to observe this may cause electricalshock.Turn the power off when cleaning thisproduct. S 8530Failure to observe this may cause injury.Install the product securely on a ceiling orwall in accordance with the installationinstructions.Failure to observe this may cause injury oraccidents.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.[Precautions for use]When the product is accessible from theInternetTo prevent unauthorized access, note thefollowing.• Leave user authentication turned on.• Periodically change passwords that areused to access the product.Refer to the Operating Instructions on thePanasonic support web site for informationabout how to change passwords.To keep on using with stable performanceDo not use this product in hot and humid con-ditions for a long time. Failure to observe thiscauses component degradation resulting in lifeshortening of this product. Do not expose thisproduct to direct heat sources such as a heater.This product has no power switch.When turning off the power, disconnect thepower supply from the the PoE device.Handle this product with care.Do not drop this product, nor apply shock orvibration to the product. Failure to observe thismay cause trouble.About the batteryA battery is installed inside the camera. Do notleave the battery exposed in environments ofexcessive heat as a result of sunlight or fire.Do not subject dome cover to strongimpact.Doing so may cause damage or immersion.Do not touch the dome cover with yourbare hands.A dirty dome cover causes deterioration of pic-ture quality.When an error is detected, this productwill restart automatically.This product will be inoperable for around 2minutes after the restart just as when thepower is turned on.