Installation and WiringFP2/FP2SH4 − 274.4 Wiring the Connector Type I/O Units4.4.3 Connecting the TerminalsCT-2 Connector TerminalUse a 40-pin type CT-2 connector terminal.For connecting the terminal to the terminal block, use M3-sized pressure connectionterminals.NoteIf using the CT-2 connector terminal for the input, connect be-tween the COM terminals.If using the CT-2 connector terminal for the output, 24V DCshould be supplied between (+) and (−) terminals. Power is sup-plied to drive the internal circuit of the output unit. (Connectbetween each the (+) terminals and between each the (−) termi-nals.)CT-2 connector terminal connection diagram for 32−point type and 64−point typeI/O units and I/O mixed unitsFP2−X32D2, FP2−Y32T, FP2−Y32P,FP2−X64D2, FP2−Y64T, FP2−Y64PFP2−XY64D2T, FP2−XY64D2P,FP2−XY64D7T, FP2−XY64D7PConnector terminal cable(40 pins − 40 pins)CT-2 connector terminal(40 pins)(AYC1140)
