OverviewFP2/FP2SH1 − 211.4 Programming Tools1.4.3 Tools Needed for ROM CreatingWhen Creating ROM with a Commercially Available ROM Writer with Op-tional Memory (FROM)Necessary tools1 Programming tool software and cable ( section 1.4.1)Use a commercially available computer installed with the programming tool soft-ware and an FP PC cable.2 Optional memory FROMFor FP2, FP2-EM4 (SST−29EE010−120−4C−PH or equivalent, SILICOM STOR-AGE TECHNOLOGY, INC.)For FP2SH, AFP5208 (SST−29EE020−150−4C−PH or equivalent, SILICOMSTORAGE TECHNOLOGY, INC.)3 Optional memory EPROMFor FP2, FP2-EM5 (M27C1001−12F1 or equivalent, SGS−THOMSON MI-CROELECTRONICS)For FP2SH, AFP5209 (M27C2001−150F1 or equivalent, SGS−THOMSON MI-CROELECTRONICS)For the following, use commercially available products.4 Commercially available ROM writerA ROM writer than can be used with memories 2 and 3 .Note1) The above explanation describes the case where the memoryunit is used in combination with the F−ROM and EP−ROM. Asthe nonvolatile memory has been implemented in the memoryunit (Model number AFP2208), a commercial ROM writer can-not be used for writing.2) The parts for the optional memory to be used differ dependingon FP2 or FP2SH.
