Panasonic kX-TG2323C Operating Instructions Manual

Panasonic kX-TG2323C Operating Instructions Manual Manual pdf 18 page image

Preparing the Answering System18Number of RingsYou can select the number of times the unit rings before the AnsweringSystem answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.Remote CodeThe remote code prevents unauthorized people from accessing your unitand listening to your messages from any touch tone phone (see “RemoteOperation from a Touch Tone Phone” on page 28).Choose any 2-digit number (00–99) for your remote code.The factory preset remote code is “11”. If you do not program your ownremote code, you can use “11”.To confirm the remote code, repeat steps 1 and 2.• The remote code is displayed. When finished, press [OFF].1 Press [VOICE ENHANCER].• The indicator flashes.2 Press [2].• The current setting is displayed on the base unit.3 Select the number of rings by pressing [0] (Toll saver*), or [2] to [7].• If [0] (Toll saver) is pressed, “ ” is displayed.4 Press [VOICE ENHANCER].• The handset beeps and the indicator light goes out.*Toll saverWhen you call the unit from a remote operation, the number of rings will tell youif there are any new messages. If the unit answers on the 2nd ring, there is atleast one new message. If the unit answers on the 4th ring, there are no newmessages. To save the toll charges for the call, hang up immediately when youhear the 3rd ring. The 3rd ring indicates that there are no new messages.1 Press [VOICE ENHANCER].• The indicator flashes.2 Press [1].• The current remote code is displayed on the base unit.3 Enter a 2-digit remote code (00–99).4 Press [VOICE ENHANCER].• The handset beeps and the indicator light goes out.HandsetHandsetTG2323C.fm Page 18 Friday, February 20, 2004 10:59 AM