Pantech GF 200 User Manual

Also see for GF 200: User manual

Contents

Pantech GF 200 User Manual Manual pdf 23 page image

45Once a call is held, the name and icon of the caller will fadeto gray.To make a call while you have a call in progress:1 Enter the phone number that you want to dial or look it up in theContacts.2 Press the key to dial the second call.The first call is automatically put on hold.To switch between two calls, simply press the [Swap] Soft key.The current call is placed on hold and the call on hold is reactivatedso that you can continue your conversation with the other person.If you want to finish, complete each call normally by pressing the[ ] key.Answering Second CallYou can answer an incoming call while you have a call inprogress, if your network service provider supports thisservice and you have activated the [Call waiting] option (seeMenu 6.2.4). You will be notified of an incoming call by a callwaiting tone.To answer a call while you have another call in progress:1 Press the [ ] key to answer the incoming call.2 The first call is automatically put on hold.44C alling OptionsDuring a call, press the [ ] key to show call options.Switching the MicroPhone Off (Mute)You can temporarily switch your phone’s microphone off sothat the other person cannot hear you.For example, you may wish to say something to anotherperson in the room but do not want the person calling tohear you.Press the [Mute] Soft key,Or, select Option followed by ‘Mute’ to activate the Mutefunction.To switch the microphone back on:Press the [Sound] Soft key.Or, press the [Option] Soft key and then press the [Select]Soft key or [ ] key, when [Sound] highlights.Putting a Call on HoldYou can place a current call on hold whenever you want. Youcan make another call while you have a call in progress ifyour network service provider supports this service. Of thesetwo calls, one is active and the other is on hold and you canswitch between the calls.To place a call on hold, simply select [Option] Soft keyfollowed by [Hold], or press the [ ] key.You can reactivate the call whenever you want by selecting[Option] followed by [Retrieve].