Monitoring and Testing4-173163-A2-GB20-10 March 1999Aborting Test PatternsUse the Abort command to stop all test patterns or anyselected test pattern active on the DSU/CSU. ProcedureTo abort test patterns:1. From the top-level menu screen, select Test.2. From the Test screen, select Ptrns.F1Test:Rlpbk Lpbk PtrnsF2 F33. From the Patterns screen, select Abort.F1Patterns:Abort Send MonF2 F34. From the Patterns Abort screen, press the desiredFunction key to abort either All active testpatterns, active Send test patterns, or the activeMonitor (Mon) test pattern.F1Patterns: AbortAll Send MonF2 F3If you select All, the DSU/CSU terminates allactive test patterns and displays the messageCommand Complete. Skip Step 5.NOTEIf you mistakenly choose to abort atest pattern that is not currentlyrunning, a Command Completemessage still displays and the testpattern currently active still runs. Usethe TStat branch to view the teststatus to determine if the abort wassuccessful.5. From the Abort screen, press the Function key thatcorresponds to the network or port for which youwant to abort a test pattern. Use the scroll keys, ifnecessary.F1Abort:Send or MonNET Prt1F2 F3The DSU/CSU terminates the selected test patternand displays the message Command Complete.Lamp TestUse the Lamp Test commands to start and stop a test ofthe DSU/CSU front panel LCD and LEDs.Starting a Lamp Test ProcedureTo start a Lamp test:1. From the top-level menu screen, select Test.2. From the Test screen, press the key until theLamp selection appears on the screen.3. From the Test screen, select Lamp.
