Paradyne 3172 Operator's Manual

Also see for 3172: Quick installation Quick reference Operator's guide

Paradyne 3172 Operator's Manual Manual pdf 85 page image

ACCULINK 317x E1 DSU/CSU4-24 March 1996 3170-A2-GB20-105. The following screens alternately appear on theLCD until you press a Function key to return tothe Lamp Test screen. In addition, all LEDs blink.F1 F2 F3F10123456789 : ; < = > ?@ABCDEFGHIJKLMNOF2 F36. When you are satisfied that all LEDs are lightingand the LCD is functioning properly, abort theLamp test from the Lamp Test screen. The DeviceHealth and Status screen appears automatically ifthere is no activity on the E1 DSU/CSU frontpanel for five minutes. However, the Lamp testremains active until it is aborted.Aborting a Lamp TestTo abort the Lamp test,1. Display the Lamp Test screen. To do this when theLCD is alternating the Lamp test screens, pressany Function key. Otherwise, follow Steps 1through 3 for starting a Lamp test.F1Lamp Test:Abort StartF2 F32. From the Lamp Test screen, press F1 to selectAbort.F1Lamp Test:Abort StartF2 F3Displaying E1 DSU/CSUTest StatusUse the Test Status command to display the active testsfor the E1 DSU/CSU. Status messages that can display onthe front panel LCD are listed in Table 4-10.To display test status,1. Press F1 to select Stat from the top-level menuscreen.F1DSU E1 CEPTStat Test CnfigF2 F32. From the Status screen, press the key once todisplay the TStat selection.F1Status:DevHS STest PerfF2 F33. Press F3 to select TStat.F1Status:STest Perf TStatF2 F3The Test Status screen appears showing you whattests are active for the E1 DSU/CSU.