MIB DescriptionsC-297112-A2-GB20-20 March 1998Enterprise MIB ObjectThe following Paradyne Enterprise MIB Object is supported by the unit: Device Configuration Variable, Table C-17Device Configuration Variable (pdn-common 7)The variable devConfigAreaCopy in the devConfigArea group is supported. Thisvariable allows the entire contents of one configuration area to be copied intoanother configuration area. The unit only supports the following values.Table C-17. Device Configuration VariableObject, OID, Access Description Setting/ContentsdevConfigAreaCopy1.3.6.1.4.1.1795.2.24.2.7.1.1A “get” of this object willalways return noOp.noOp(1)1.3.6.1.4.1.1795.2.24.2.7.1.1read-write Copy from active area tocustomer 1 area.active-to-customer1(2)Copy from active area tocustomer 2 area.active-to-customer2(3)Copy from customer 1 areato active area.customer1-to-active(4)Copy from customer 1 areato customer 2 area.customer1-to-customer2(5)Copy from customer 2 areato active area.customer2-to-active(6)Copy from customer 2 areato customer 1 area.customer2-to-customer1(7)Copy from factory area toactive area. There is only onefactory area for the unit.factory1-to-active(8)Copy from factory area tocustomer 1 area.factory1-to-customer1(9)Copy from factory area tocustomer 2 area.factory1-to-customer2(10)Device Security, pdn-security (pdn-common 8)Use the Device Security table to control the number of SNMP managers that mayaccess the unit, as well as the unit access level (read or read/write). Fullysupported by the unit.Device Traps, pdn-traps (pdn-common 9)Controls the SNMP managers to which the unit reports traps. Fully supported bythe unit.Device Control, pdn-control (pdn-common 10)Uses the devControlReset object to reset the unit. Fully supported by the unit.
