Paradyne 7610 User Manual

Also see for 7610: Quick installation Overview User guide

Contents

Paradyne 7610 User Manual Manual pdf 22 page image

Start-Up3-2 7610-A2-GB20-00November 1996The user interface is blank until activated. Press Return to activate the userinterface. Security can limit ATI access several ways. To setup security or a loginID, refer toSecurity, Chapter 4.Entering Device and System InformationUse the Device Name screen to input DSU device and SNMP system entries. Toaccess the Device Name screen, follow this menu selection sequence:Main Menu →Control →Device Namemain/control/device nameDevice Name: Model: 7610DEVICE NAMEDevice Name: NE815378 ClearSystem Name: lllQJ98-001 ClearSystem Location: Bldg. A412, 2nd Floor, Left cabinet ClearSystem Contact: Joe Smith 800-555-5555 pager 888-555-5555 Clear––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions, ESC for previous menu MainMenu ExitSaveÎÎÎÎÎÎAny printable ASCII characters are valid entries for all the Device Name screeninputs. Refer to theASCII Characters section in Appendix A. The Device Namefield is alphanumeric and provides for an input of 20 characters. The DeviceName entry appears on all ATI screens. The input on this screen is displayed onthe Identity screen. Refer to theIdentity Information section.System FieldsThe three System entry fields are alphanumeric and provide 127 characters foreach field. The System entries appear on the Identity display as shown in thenext section. The SNMP System entry fields are: System Name: The general SNMP system name System Location: The physical location of the SNMP managed device System Contact: Identification information, such as contact name, phonenumber, or mailing addressPress Ctrl-a to switch to the screen function key area below the dotted line.Select Save and press Return. When Save is complete, Command Completeappears at the bottom of the screen.