Configuration Option TablesA-157610-A2-GB20-00 November 1996Table A-5. Management Port Options (3 of 3)Stop BitsPossible Settings: 1, 1.5, 2Default Setting: 1Provides the number of stop bits for the Management port. Stop Bits option appears when Port Type is set to Asynchronous.1, 1.5, or 2 – Selects the number of stop bits.Monitor DTRPossible Settings: Enable, DisableDefault Setting: EnableSpecifies monitoring of the Data Terminal Ready (DTR) control lead. Monitor DTR option appears when Port Type is set to Asynchronous.Enable – Standard operation of the DTR control lead.Disable – DTR is ignored. Some external device connections may require this setting.Routing Information ProtocolPossible Settings: None, ProprietaryDefault Setting: NoneSpecifies the routing protocol between devices through the Management port. Routing Information Protocol appears when Port Use is set for Net Link.None – No routing protocol; use None when the device connected to the Managementport is not a Model 7610.Proprietary – Uses proprietary variant of RIP Version 1 to enable the routing of IPtraffic between Paradyne devices.External Device Options for the Management PortTo access the External Device Options screen, follow this menu selectionsequence:Main Menu →Configuration →Load Configuration From →Edit →User Interface →External Device
