Paradyne 7610 User Manual

Also see for 7610: Quick installation Overview User guide

Contents

Paradyne 7610 User Manual Manual pdf 73 page image

Configuration Option TablesA-137610-A2-GB20-00 November 1996Table A-4. Terminal Port Options (3 of 3)Inactivity TimeoutPossible Settings: Enable, DisableDefault Setting: DisableProvides automatic logoff of an ATI session through the Terminal Port. When thesession is closed, User Interface Idle appears on the screen and the unit toggles theTerminal port DSR lead.Enable – The ATI session terminates automatically after the Disconnect Time set in thenext option. When the session was occurring over an external modem connected to theTerminal port, the modem will interpret the DSR toggle as DTR being dropped anddisconnect.Disable – An ATI session through the Terminal port will remain active indefinitely.Disconnect Time(minutes)Possible Settings: range 1 – 60Default Setting: 5Number of minutes of inactivity before the ATI session terminates automatically.Timeout is based on no keyboard activity. Disconnect Time(minutes) option appears when Inactivity Timeout is enabled.1 to 60 – The ATI user session is closed after the selected number of minutes.Management Port OptionsTo access the Management Port Options screen, follow this menu selectionsequence:Main Menu →Configuration →Load Configuration From →Edit →User Interface →Management PortTable A-5. Management Port Options (1 of 3)Port UsePossible Settings: Net Link, Alarms, NoneDefault Setting: Net LinkThe Management port provides a choice of functions.Net Link – The Management port is the network communication link and providesconnectivity to an IP network to support SNMP managers and Telnet sessions.Alarms – The Management port is dedicated as an alarm port and sends out ASCIIalarm messages.None – Disables the Management port. No other fields in this table will appear when set to None.