2. Using the Asynchronous Terminal Interface8700-A2-GB20-40 May 2002 2-9Ending an ATI SessionUse the Exit function key from any screen to terminate the session.ProcedureTo end a session with the asynchronous terminal interface:1. Press Ctrl-a to go to the function keys below the dotted line.2. Save changes if required. A confirmation message appears if you have madebut not saved changes to your configuration.3. Tab to Exit (or type e or E) and press Enter. If you have accessed the unitthrough the management card, the Hotwire Chassis Card Selection menuappears.Exiting From the DSLAM SessionYou can manually log out of the system or, after five minutes of inactivity, thesystem will automatically log you out.ProcedureTo manually exit from the Hotwire DSLAM system:1. Return to the Hotwire Chassis Main Menu by selecting Exit from either theHotwire – MCC menu or the Hotwire – DSL menu.The Hotwire Card Selection menu appears.2. Press Ctrl-z.The Hotwire Chassis Main Menu appears.3. From the Hotwire Chassis Main Menu, select Logout.The system exits from the current login session on the Hotwire DSLAM.
