Paradyne ACCULINK 336x E1 Operator's Manual

Also see for ACCULINK 3360: Quick installation Operator's guide User guide

Contents

Paradyne ACCULINK 336x E1 Operator's Manual Manual pdf 34 page image

Operation3-133360-A2-GB20-20 December 1996Saving Edit ChangesSave edit changes to the Active area when you wantthose changes to take effect immediately. Save editchanges to the Customer area when you want to overwritethe existing Customer configuration options and storethese changes for future use.NOTEIf you attempt to exit the Editfunction after making changeswithout performing a Save, the E1NTU prompts you with SaveOptions? Choose Yes or No.To save edit changes,1. From the Choose Function screen (one level abovethe Edit screen, two levels below the top-levelmenu screen), select Save.F1Choose Funct:Edit SaveF2 F32. Choose whether you want to save to the Active,Customer 1, or Customer 2 area. Use the scrollkeys, if necessary.F1Save Edit to:Activ Cust1F2 F3Selecting/Copying to a Specific PortFor the E1 NTU, you have the capability of selecting aspecific port to configure, and then (for 2-port and 4-portE1 NTUs) copying the configuration options from thatport to another port (or to all ports).NOTEThe following procedure is anexample only. Screen displaysmay vary depending on themodel and configuration of theE1 NTU.To select a specific port to configure,1. From the top-level menu screen, select Cnfig.2. Select the configuration option set to be copiedinto the Edit area by using the appropriateFunction key. Use the scroll keys, if necessary.3. Select Edit.4. From the Edit screen, select Port.F1Edit:DTE Port NETF2 F35. From the Port Select screen, press the Functionkey that corresponds to the port you want toconfigure. Use the key to scroll addition portsonto the screen, if necessary. Configure the port(see Appendix C, Configuration Options).F1Port Select:Copy Prt1 Prt2F2 F3