Paradyne ACCULINK 336x E1 Operator's Manual

Also see for ACCULINK 3360: Quick installation Operator's guide User guide

Contents

Paradyne ACCULINK 336x E1 Operator's Manual Manual pdf 57 page image

ACCULINK 336x E1 NTU3-36 December 1996 3360-A2-GB20-203. From the Control screen, select Rel (Release).F1Control:Rel LED ClrRegF2 F3The active user interface is released. A screen withthis message appears. No user interface is activeuntil input is received from a user interface.F1Ft. Panel:ReleasedF2 F3Resetting the E1 NTUUse the Reset command to perform a power-on reset ofthe E1 NTU.To reset the E1 NTU,1. From the top-level menu screen, press the keyuntil the Ctrl selection appears on the screen.F1E1 HDSL NTUStat Test CnfigF2 F32. Select Ctrl.F1E1 HDSL NTUTest Cnfig CtrlF2 F33. From the Control screen, press the key untilthe Reset selection appears on the screen.F1Control:Rel LED ClrRegF2 F34. Select Reset.F1Control:ClrReg ResetF2 F35. From the Device Reset screen, press F1 to initiatea reset of the E1 NTU (the power-up sequencescreen appears). Press F2 instead to return to theControl screen without initiating a reset.F1Device Reset:Yes NoF2 F3Download OperationsNOTEThe Download command is foruse by service personnel only.Loss of primary data could resultfrom improper use.