MTU-M Alarms8-2 7900-A2-GB20-00March 1998Accessing MTU-M Alarm FunctionsTo access the MTU-M Alarms menu from the MTU-M Main Menu, type a at theMTU-M –> prompt and press Enter. The Alarms menu appears as follows:Menu path: Main →AlarmsMTU-M Alarms MenuSelect Command:COMMAND DESCRIPTIONAlarm on – Display MTU-M alarms– (Case sensitive, or use ’ALARM ON’)Alarm off – Turn off display of MTU-M alarms– (Case sensitive, or use ’ALARM OFF’)Clear – Reset Alarm Display PointerDisplay – Display MTU-M alarmsRedisplay – Redisplay MTU-M alarmsQuit – Quit CommandAlarms ->Command FunctionAlarm on Allows alarms to display at the system terminal.Alarm off Prevents alarms from displaying at the system terminal.Clear Clears the current MTU-M alarm buffer.Display Allows you to group and view alarms by category, view individual alarms,or view all alarms. Refer to the screen samples following this table forfurther detail on the display alarm function.Redisplay Allows you to redisplay the last alarms viewed.Quit Takes you back to the MTU-M Main Menu.
