Parker ETH080 Mounting Instructions

Also see for ETH Series: Mounting instructions Operating / Mounting instructions

Parker ETH080 Mounting Instructions Manual pdf 10 page image

Introduction ETH- Electromechanical Cylinders10 192-550002N2 ETH Mounting instructions March 20111.4.6. Safety Instructions for Operating PersonnelAny work step that has a negative effect on the operating safety of the linear motor modulemust be omitted.Operating and supervisory personnel are required to check the linear actuator or machineat least once per shift for externally visible damage or defects. Changes that have occurred(including the operating behavior) that could have a negative effect on the operating safetymust be reported immediately.Components and accessories are designed especially for this product. When purchasingspare and wearing parts, use only original Parker parts. We note here explicitly that we areunable to check or release spare parts or accessories that were not provided by us.Installing and/or using such products may cause negative changes in the required designproperties in some circumstances, which in turn could negatively affect the active and/orpassive operating safety of the product.The manufacturer is unable to accept any liability for damage caused by using non-originalparts and accessories.Safety and protection devices are strictly NOT to be removed or bypassed or set out oforder.Applicable requirements and national accident prevention regulations must always beobserved when installing and operating our linear motor module.1.5 Packaging, storage, transportFirst check◆ Check the packaging for damages.◆ Remove the packaging.Do not discard the packaging; it is strongly recommended to use the original packagingmaterial for return deliveries.◆ Depending on the storage location, metal surfaces may have a temperature of 0 °C orbelow. Please provide appropriate worker protection (e.g. protective gloves).◆ Please ensure that the consignment does correspond to your order.◆ Check the product for damages. Do never use a device which seems damaged.◆ Please read the installation manual carefully before installing or commissioning the device.Packaging materialThe packaging material is inflammable, if it is disposed of improperly byburning, lethal fumes may develop.TransportMake sure to transport the linear module always in a safe manner and with the aid ofsuitable lifting equipment (Means of transport).StorageThe linear module must be stored evenly and without any mechanical load.The stated storage temperature must be adhered to.DisposalWe recommend disposing of the respective materials in accordance with the respectivelyvalid environmental laws. The following table states the materials suitable for recycling andthe materials which have to be disposed of separately.Material suitable forrecycling DisposalMetal yes noPlastic materials yes no