Parker LCB Series Mounting Instructions

Also see for LCB Series: Installation, Commissioning, Maintenance and Repair

Contents

Parker LCB Series Mounting Instructions Manual pdf 7 page image

Parker EME Introduction192-510014 N06 April 2013 7Hint Provides important information about the product, how to handle the product or about thepart of the manual to which particular attention must be paid.1.4.4. Working safelyHeed the InstructionsThe information (such as instructions and notes) contained in this manual must beheeded for all work involved in installing, commissioning, setting up, operating,changing operating conditions and modes, servicing, inspecting and repairing theunit.The manual must be available close to the linear module during the performance ofall tasks.It is impermissible to operate the liner module if it is not in perfectly functionalcondition.Operating personnelThe following jobs must only be performed by appropriately trained and authorizedpersonnel: Installation and set-up tasks on the linear actuator Attaching safety limit switches (initiators) Connecting the drive and testing the motion directionInstructions for Special HazardsThe linear module must be fixed or supported in accordance with the indications inthis manual.The operator must ensure that operation of the linear module does not cause anydanger.If the linear module moves in hazardous areas, these areas can be safeguardedwith safety transmitter switches.1.4.5. Safety Instructions for the Company Using the SystemSupervisors must also become familiar with the entire chapter entitled "Safety" andhandling required on the linear actuator.Supervisors must ensure that installation and operating personnel have read andunderstand the chapter entitled "Safety" and the description of how to work with themachine, and that they observe the instructions.The manual must be available close to the linear module during the performance ofall tasks.It is impermissible to operate the liner module if it is not in perfectly functionalcondition.Depending on the application, the operating company must provide for a suitableseparating safety fence. Access to the motion range during operation must beprevented.The user must make sure that the work area is protected by appropriate safetydevices.1.4.6. Safety Instructions for Operating PersonnelAny work step that has a negative effect on the operating safety of the linear motormodule must be omitted.Operating and supervisory personnel are required to check the linear actuator ormachine at least once per shift for externally visible damage or defects. Changesthat have occurred (including the operating behavior) that could have a negativeeffect on the operating safety must be reported immediately.Components and accessories are designed especially for this product. Whenpurchasing spare and wearing parts, use only original Parker parts. We note hereexplicitly that we are unable to check or release spare parts or accessories thatwere not provided by us. Installing and/or using such products may cause negative