COMMUNICATIONS MODULES160 Parker Automation Controller Installation GuideEthernet/IP OverviewThe PAC can be ordered with and optional Ethernet/IP option. With this option the PAC can be configuredto act as a Scanner (PAC versions 1.3.0 or later) or as an Adapter that can produce (broadcast) tags thatcan be consumed (received) by a RockwellTo use the PAC as an Ethernet/IP Scanner, create a project using Parker AutomationManager1. Launch PAM.2. Open a project or create a project using a PAC device.3. Expand the Tools Menu in PAM.a. Select Device Repository.b. Click the Install... button.c. Browse to the location of the Adapter EDS file on your computer.d. Be sure the file type is EDS.e. Click Open.f. Click Close.(You only have to do this step 1 time, the EDS file is saved in PAM.)4. Right Click on the PAC Device in the Devices Tree.5. Choose Add Device.a. Expand Ethernet Adapter.b. Choose Ethernet.c. Click Add Device.d. Click Close.6. Right Click on the Ethernet object in Devices.7. Choose Add Device.a. Expand EtherNet/IP.b. Choose EtherNet/IP Scanner.c. Click Add Device.d. Click Close.8. Double Click on Ethernet_IP_Scanner in the Device Tree.
