Patton electronics 2120 User Manual

Contents

Patton electronics 2120 User Manual Manual pdf 45 page image

45activate is complete!TS>Windows Name Server (WINS)The Model 2120 supports WINS address exchange with the PPP device.Primary and secondary WINS addresses can be configured for the PPPclient device. The primary and secondary WINS addresses are config-ured by executing the following commands at the 2120 command systemprompt:TS>configure eia232 ppp priwinsaddr of PrimaryDNS>TS>configure eia232 ppp secwinsaddr of Second-ary DNS>TS>configure eia232 ppp peernsaddruseena noTS>configure activateactivate is complete!TS>Obtaining Name Server Addresses From PPP ClientThe Model 2120 may also obtain name server addresses from the PPPdevice connected to the serial interface. Every time a PPP establishes aconnection, the Model 2120 will use the name server addresses pro-vided by the PPP instead of the other configured name server addresses(DNS and WINS). Obtaining name server addresses from the PPP/SLIPis configured by executing the following commands at the 2120 com-mand system prompt:TS>configure eia232 ppp peernsaddruseena yesTS>configure activateactivate is complete!TS>Obtaining Name Server Addresses From SLIP ClientWhen operating in SLIP mode, the Model 2120 must obtain name serveraddresses from the SLIP device connected to the serial interface. Everytime a SLIP establishes a connection, the Model 2120 will use the nameserver addresses provided by the SLIP. Obtaining name serveraddresses from the SLIP is configured by executing the following com-mands at the 2120 command system prompt: