'LVSOD\LQJWKH7($VVLJQPHQWZLQGRZ 149'6/'$&6$GPLQLVWUDWRUVª5HIHUHQ H*XLGH 19 • T1/E1 AssignmentThe :$1$VVLJQPHQW7DEOHwindow consists of four column groups, one for each WAN port. The top of eachcolumn group identifies the WAN port by name, e.g., WAN Port 1: Alarms. This is a hyperlink leading to theLine Status Alarms web page. The “Line Status Alarms” page gives the status of the T1/E1 WAN port. This isthe same web page seen under the T1/E1 Link Activity page in the T1/E1 Link subsytem.Under each WAN port column group are four columns named 6ORW, 'HYL H, 3RUWG, and 6ORWG.Slot6ORW refers to the time slot in the T1/E1 port. Whether you have chosen T1 or E1, all 31 channels will be dis-played although in T1, only those numbered 1–24 are applicable.DeviceDevice (daxWAN0DeviceType, daxWAN1DeviceType, daxWAN2DeviceType, daxWAN3DeviceTyp)refers to the device type to which the WAN slot connects. The device type options are:• open(0)• t1-e1(1)• iDSL(2)Note There are four variables for Device Type wheredaxWAN0DeviceType applies to those in WAN Port 1. SimilarlydaxWAN1DeviceType applies to those in WAN Port 2. Likewise forthe others.Port #3RUWG (daxWAN0DeviceNumber, daxWAN1DeviceNumber, daxWAN2DeviceNumber,daxWAN3DeviceNumber) refers to the port number of the Device Type in the second sub-column. ForDevice Types of iDSL, the Device Number (Port #) may be from SRUW23 to SRUW23. Since there are onlyfour WAN ports, the Device Number (Port #) may be chosen from SRUW23 to SRUW23.Slot #6ORWG (daxWAN0DeviceSlot, daxWAN1DeviceSlot, daxWAN2DeviceSlot, daxWAN3DeviceSlot) refer to the slotnumber (or time slot) of the Device. For iDSL Device Types, Slot# may be either 1, 2, or 3. For t1-e1 DeviceTypes, Slot# may vary from 1 to 31.