Philips 1200 Series User Manual

Also see for 1200 Series: User manual User manual User manual User manual User manual

3 Place a cup under the coffee dispensing spout.4 Select a single drink.5 Press the aroma strength icon for 3 seconds (Fig. 13).- The pre-ground coffee light goes on and the start light starts pulsing.6 Press the start/stop button.7 To stop dispensing coffee before the machine is finished, press the start/stop button again.With pre-ground coffee you can only brew one coffee at a time.Pre-ground coffee is not a setting that is saved as a previous selected strength setting. Each timeyou want to use pre-ground coffee, you need to press the aroma strength icon for 3 seconds.When you select pre-ground coffee, you cannot select a different aroma strength.Dispensing hot water1 If attached, remove LatteGo or the milk frother.2 Tap the hot water icon (Fig. 14).- The drink quantity lights go on and show the previous selected drink setting for hot water.3 Adjust the hot water quantity to your preference by tapping the drink quantity icon (Fig. 3).4 Press the start/stop button.- The light in the hot water icon flashes and hot water is dispensed from the hot water spout (Fig.15).5 To stop dispensing hot water before the machine is finished, press the start/stop button again.Adjusting machine settingsAdjusting the stand-by time1 Press the on/off button to switch off the machine.2 When the machine is switched off: press and hold the Calc / Clean icon (Fig. 16) until the Calc /Clean light and the Aroma strength lights go on (Fig. 17).3 Tap the Aroma strength icon to select the required stand-by time: 15, 30, 60 or 180 minutes.Respectively 1, 2, 3 or 4 lights of the Aroma strenght icon light up.4 When you have finished setting the stand-by time, press the start/stop button. The machineswitches off.5 Press the on/off button to switch on the machine again.Programming the highest default setting of your drinksThe machine has 3 default settings for each drink: low, medium, high. You can only adjust the quantityof the highest setting. The new quantity can be stored as soon as the start light starts to pulse.Before you start programming the quantity of a milk drink, assemble LatteGo and pour milk in it.1 To adjust the highest quantity setting, press and hold the icon of the drink you want to adjust for 3seconds.10 English