Philips 225B2 User Manual

1This electronic user’s guide is intended for anyonewho uses the Philips monitor. Take time to readthis user manual before you use your monitor.It contains important information and notesregarding operating your monitor.The Philips guarantee applies provided theproduct is handled properly for its intended use,in accordance with its operating instructions andupon presentation of the original invoice or cashreceipt, indicating the date of purchase, dealer’sname and model and production number of theproduct.1.1 Safety precautions and maintenanceWarningsUse of controls, adjustments or procedures otherthan those specified in this documentation mayresult in exposure to shock, electrical hazardsand/or mechanical hazards.Read and follow these instructions whenconnecting and using your computer monitor.OperationKeep the monitor out of direct sunlight and•away from stoves or any other heat source.Remove any object that could fall into•ventilation holes or prevent proper cooling ofthe monitor’s electronics.Do not block the ventilation holes on the•cabinet.When positioning the monitor, make sure the•power plug and outlet are easily accessible.If turning off the monitor by detaching the•power cable or DC power cord, wait for 6seconds before attaching the power cable orDC power cord for normal operation.Please use approved power cord provided•by Philips all the time. If your power cord is•missing, please contact with your local servicecenter. (Please refer to Customer CareConsumer Information Center)1. Important Do not subject the monitor to severe•vibration or high impact conditions duringoperation.Do not knock or drop the monitor during•operation or transportation.MaintenanceTo protect your monitor from possible•damage, do not put excessive pressure on theLCD panel. When moving your monitor, graspthe frame to lift; do not lift themonitor by placing your hand or fingers on theLCD panel.Unplug the monitor if you are not going to•use it for an extensive period of time.Unplug the monitor if you need to clean it•with a slightly damp cloth. The screen may bewiped with a dry cloth when the power isoff. However, never use organic solvent, suchas, alcohol, or ammonia-based liquids to cleanyour monitor.To avoid the risk of shock or permanent•damage to the set, do not expose the monitorto dust, rain, water, or excessive moistureenvironment.If your monitor gets wet, wipe it with dry cloth•as soon as possible.If foreign substance or water gets in your•monitor, please turn the power off immediatelyand disconnect the power cord. Then, removethe foreign substance or water, and send it tothe maintenance center.Do not store or use the monitor in locations•exposed to heat, direct sunlight or extremecold.In order to maintain the best performance of•your monitor and use it for a longer lifetime,please use the monitor in a location that fallswithin the following temperature and humidityranges.oTemperature: 0-40°C 32-95°FoHumidity: 20-80% RH