Philips 4000 Series Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

For 4:3 Video signalWide screen Movie expand 16:9 Movie expand 14:94:3Super zoomAutomaticAutomaticOther than DTV and HDMI connecteddevices, enlarges the picture to Best fit thescreen.DTV and HDMI connected devices displaythe picture at its original size. The subtitlesmay remain visible.Super zoomDisplays a 4:3 picture at a 16:9 size; the pictureis stretched horizontally and vertically and itsleft and right edges are enlarged. This cropsout some of the top and bottom of thepicture.4:3 Displays a 4:3 picture at its original size.Sidebars appear on both edges of the screen.Movieexpand 14:9Displays a 4:3 picture at a 14:9 size; the pictureis stretched horizontally and vertically.This crops out some of the top and bottom ofthe picture. Sidebars appear on both edges ofthe screen.Movieexpand 16:9Displays a 4:3 picture at a 16:9 size; the pictureis stretched horizontally and vertically. Thiscrops out some of the top and bottom of thepicture.Wide screen Displays a picture that is stretched out ofproportion to fill the screen.For PC Input signalUnscaledWide screen4:3• This unit can also be connected to your PC that has a DVITerminal.Use an HDMI-DVI Conversion Cable for this VideoConnection and it requires Stereo Mini 3.5mm Plug AudioCable for Analog Audio signal as well.• Refer to 16:9 Video Signal on this page if the PC has HDMIOutput.4:3 Displays a proportionately stretched picture.Sidebars appear on both edges of the screen.Wide screen Displays a picture that is stretched out ofproportion to fill the screen.Unscaled Displays a picture in its original size.If the signal source has side or top-bottom barsinserted into the picture, the Picture Format functionwill not eliminate them.Caption SettingsClosed Captions displays the Audio portion of theProgram as Superimposed Text over the Video.1 Press and use to Select Setup, then pressOK.2 Use to Select TV settings, then press OK.3 Use to Select Accessibility, then press OK.4 Use to Select Caption settings, then pressOK.Closed CaptionsYou can choose the Closed Caption display.5 Use to Select Closed captions, then pressOK.6 Use to Select On, Off or CC w/ mute, thenpress OK.Cable / NTSC (Analog) TV OperationCaption service5 Use to Select Caption service, then press OK.6 Use to Select the desired Caption service, thenpress OK.CC-1 andT-1The primary Closed Captions and Text Services.The Closed Captions or Text is Displayed in thesame Language as the Program’s Dialog (up to 4lines of script on the TV Screen).CC-3 andT-3Serve as the preferred Data Channels. TheClosed Captions or Text is often a SecondaryLanguage.CC-2,CC-4, T-2and T-4Rarely available and Broadcasters use them onlyin Special conditions, such as when CC-1 andCC-3 or T-1 and T-3 are Not available.• There are 3 Display modes according toPrograms:Paint-on Displays Characters on the TVscreen immediately.Pop-on Once Characters are Stored inMemory, they are Displayed All atOnce.Roll-up Displays the CharactersContinuously by Scrolling (max. 4lines).Digital TV OperationDigital Caption service5 Use to Select Digital caption service, thenpress OK.6 Use to Select the desired Digital captionservice, then press OK.CS-1 toCS-6Select one of these before changing any otheritem in Caption settings menu. Choose CS-1under normal conditions.Digital caption optionsYou can choose the Size, Font, Color, Background andother characteristics for the Captioned Text.5 Use to Select Digital caption options, thenpress OK.6 Use to Select an item and press OK, then use to Select the desired Setting and press OK.To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support12 Continued on next page.