Philips 4000 Series Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

3 Use your TVWatching Channels from anExternal Device1 Turn On the Set-top Box or the Connected Device.• The picture from the Set-top Box or the ConnectedDevice might appear Automatically on the TV screen.IIf the picture does not appear2 Press SOURCE and use to Select the Set-top Box or the Connected Device, then press OK.3 Use the Remote Control for the Set-top Box or theConnected Device to Select Channels to view.Displaying Setup using Home Menu1 Press to display Home Menu.WirelessScreencastingSetupNet TVSourceWatch TV HomeNetwork2 Use to Select Setup, then press OK.Guide to Home Menu screenHome Menu start screenWirelessScreencastingSetupNet TVSourceWatch TV HomeNetwork Watch TV : Switches back to the TV Sourceif another Source is selected. Source : To Select Connected devices. Home Network : Accesses Home NetworkMenus. Net TV : Accesses Net TV Menus.Wireless Screencasting : Accesses WirelessScreencasting Menus. Setup : Accesses Menus that allowyou to change Picture, Soundand other TV Settings.• Please read the detailed version of this user manual onwww.philips.com/support for more information on menufeatures.NetworkSetup Network Connection Settings in order to use NetTV or Network Upgrade functions.1 Display Setup using Home Menu and use to Select Connect to network, then press OK.Connect to NetworkBefore you proceed to Connection test or other settings inNetwork section, run the Network settings assistant toconnect the TV to your Network.Wireless SettingSelect to use a wireless LAN to connect to the Internet by awireless connection.2 Use to Select Wireless, then press OK.3 Use to Select the desired Setting, then press OK, andfollow the On-screen Instructions.Setting items DescriptionEasy ConnectSelect this Setting if your router has an easyconnect feature. On your router, press the easyconnect button.If Connection Test fails, refer to the Router’sManual for more details.Scan Search for Wireless Networks automaticallyand select the Wireless Network name (SSID)from the list.Manual entrySet up the connection to the Wireless LANAccess Point (AP) (e.g. Wireless Router)manually by entering the Wireless Networkname (SSID).Wired SettingSelect to use an Ethernet Cable to connect to the Internet bya Wired Connection. Please purchase Shielded EthernetCables at your local store and use it when you Connect toNetwork equipment.2 Use to Select Wired, then press OK.• Connection test will start automatically. (Refer to ConnectionTest p. .)Connection TestPerform the following steps to Test your Internetconnection after you have connected an EthernetCable or entered Network Settings such as IP Address,DNS Settings, etc. manually.1 Display Setup using Home Menu and use to Select Network settings, then press OK.2 Use to Select Connection test, then press OK.• Connection Test will start automatically and the Testresult for Home Network and Internet will appear rightafter the Connection Test finishes.• “Testing…” is displayed while the Connection Test is inprogress.To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support8 Continued on next page.