Philips 55PUG6801 User Manual

Also see for 6801 SERIES: Quick start guide User manual User manual User manual User manual

4.10GamepadConnect a GamepadTo play games from the Internet on this TV, you canconnect a selected range of wireless gamepads. Youcan use gamepads with a USB nano receiver orgamepads with Bluetooth.To connect a gamepad with a USB nano receiver…1 - Plug the small nano receiver into one of the USBconnections on the side of the TV. The wireless nanoreceiver comes with the gamepad.2 - If the gamepad is switched on, you can use thegamepad.You can connect a second gamepad in the secondUSB connection on the side of the TV.BluetoothTo connect a wireless gamepad with Bluetooth,in Help, press the color key  Keywords and lookup Bluetooth, Pairing.Suitable gamepadsA selected range of wireless gamepads are suited andtested for use on this TV. Other gamepads might notbe fully compatible.The suited gamepads are…• Logitech F710• Logitech F510• Xbox 360 Wireless Controller for Windows• Speedlink Strike FX Wireless Gamepad• Sony Play Station wired• Mad Catz C.T.R.L. Mobile Gamepad for Android• Ipega, PG-9023• Ipega, PG-9025• PhoneJoy gamepadProblemsTo solve possible interference with other wirelessdevices on TV…• Use a USB extension cord and move the nanoreceiver about 3 feet away from the TV.• Alternatively, you can use a powered USB hubconnected to the TV and plug the nano receivers intothe USB hub.4.11USB Hard DriveWhat You NeedIf you connect a USB Hard Drive, you can pause orrecord a TV broadcast. The TV broadcast must be adigital broadcast (DVB broadcast or similar).To PauseTo pause a broadcast, you need a USB 2.0compatible Hard Drive with a minimum of 4GB of diskspace.To RecordTo pause and record a broadcast, you need aminimum of 250GB disk space. If you want to recorda broadcast with TV guide data from the Internet, youneed to have the Internet connection installed onyour TV before you install the USB Hard Drive.For more information on how to install a USB HardDrive, in Help, press the colorkey  Keywords and look up USB Hard Drive,installation.InstallationBefore you can pause or record a broadcast, youmust connect and format a USB Hard Drive.Formatting removes all files from the USB Hard Drive.1 - Connect the USB Hard Drive to one ofthe USB connections on the TV. Do not connectanother USB device to the other USB ports whenformatting.2 - Switch on the USB Hard Drive and the TV.3 - When the TV is tuned to a digital TV channel,press  (Pause). Trying to pause will start theformatting.Follow the instructions on screen.When the USB Hard Drive is formatted, leave itconnected permanently.WarningThe USB Hard Drive is formatted exclusively for thisTV, you cannot use the stored recordings on anotherTV or PC. Do not copy or change recording files on19