3 - To start the channel list upload, press .4 - Select Channels and press (right) to enterthe menu.5 - Select Channel List Copy and select Copy toTV. You might be asked to enter the Child lock PINcode of this TV.6 - The TV notifies you if the channel list is copied tothe TV successfully. Unplug the USB flash drive.To Installed TVsDepending on whether your TV is already installed ornot, you must use a different method to upload achannel list.To an already installed TV1 - Verify the country setting of the TV. (To verify thissetting, press . Select Antenna/CableInstallation and select Reinstall Channels.Press and later Cancel to leave the installation.)If the country is correct continue with step 2.If the country is not correct, you need to start areinstallation. To start the reinstallation,press . Select Antenna/Cable Installation andselect Reinstall Channels. Select the correct countryand skip the channels search. Finish the installation.When done, continue with step 2.2 - Plug in the USB flash drive that holds the channellist of the other TV.3 - To start the channel list upload, press .4 - Select Channels and press (right) to enterthe menu.5 - Select Channel List Copy and select Copy toTV. You might be asked to enter the Child lock PINcode of this TV.6 - The TV notifies you if the channel list is copied tothe TV successfully. Unplug the USB flash drive.24.3Digital Channel InstallationIf you know the channel frequency of the channelsyou want to install, you can search and store digitalchannels one by one. For best results, contact theservice provider.1 - Press , select All Settings and press OK.2 - Select Channels > Antenna/CableInstallation and press OK.3 - Enter the PIN code if asked.4 - Select Digital: Reception Test > Search andpress OK.5 - Press the numbered buttons to enter the channelfrequency.6 - Select Search and press OK.7 - When the channel is found, select Done andpress OK.70