Philips BDH4222V User Manual

Contents

User Manual BDH4222V/4223V44Accessing Geometric Adjustment ModeVarious geometric adjustments can be set using the GeometricAdjustment OSD menu. To access the Geometric Adjust sub-menu:1 Press the MENU +/- keys on the remote or the front control panel.2 The First menu displayed is the Picture menu. Make sure that the“Picture” OSD menu is displayed.3 Use the MENU +/- keys to set the selection to “ON”. As soon asyou press the button, the Geometric Adjust sub-menu will bedisplayed.4 Press the ADJ +/- keys to move up and down to choose the optionyou wish to adjust. An explanation of each adjustment is listedbelow.5 Use the ADJ +/- keys to change the setting.Table below shows an explanation of the available geometric adjustments:SCREEN WIDTHSelects the various screen width modes. See page 34 for more information.NOISE REDUCTIONAdjusts the Noice level. There are four settings to choose: OFF; lOW; MEDIUM;HIGHGEOMETRIC ADJUSTOpens the Geometric Adjust sub-menu.NOISE REDUCTIONV-SIZEChanges the vertical size of the picture. Increase to enlarge the picture size in the vertical direction.Decrease to reduce the picture size in the vertical direction.V-CENTERChanges the vertical position of the picture. Increase to shift the picture up. Decrease to shift the picturedown.H-WIDTHChanges the horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction.Decrease to reduce the picture size in the horizontal direction.H-POSITIONChanges the horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift thepicture to the left .RETURNReturn to “PICTURE” OSD menu.