15D Note:When all the water in the water reservoir hasbeen used up, the rinsing cycle is finished andthe appliance switches off automatically.6 Remove the Calc-Clean tool from the coffeespout.7 Remove the used pod and clean the podholder to prevent the sieve in the centre fromgetting clogged.9 Frost-free storageIf the coffee machine has already been used andtherefore has been flushed with water, it mayonly be used and stored in a frost-free place toprevent it from becoming damaged.10 Ordering accessoriesTo purchase accessories for this appliance, pleasevisit our website www.shop.philips.com/service.If you have any difficulties obtaining accessoriesfor your appliance, please contact the PhilipsConsumer Care Centre in your country.You will find the contact details atwww.philips.com/support.11 Environment• Do not throw away the machine with thenormal household waste at the end of its life,but hand it in at an official collection point forrecycling. By doing this, you help to preservethe environment (Fig. 55).7 Press the CLEAN/CALC CLEAN button tostart the descaling cycle. (Fig. 50)B Warning:Never interrupt the descaling cycle. If youinterrupt the descaling cycle, see chapterTroubleshooting for further instructions.• The CALC light and the light ring aroundthe on/off button start to flash slowlyto indicate that the descaling cycle hasstarted.• The descaling cycle takes approx. 35 min.During this cycle, hot water comes out ofthe coffee spout at intervals because themachine pauses several times to let thedescaler mixture act (Fig. 51).• When all the water in the water reservoirhas been used up, the descaling cycle isfinished. The light ring around the on/offbutton starts to flash rapidly to indicatethat the water reservoir is empty.8.1.2 Rinsing cycle1 Empty the bowl and place it back under thespout (Fig. 52).2 Rinse the water reservoir (Fig. 53).3 Fill the water reservoir with fresh tapwater and place it back onto the coffeemachine (Fig. 54).D Note:Do not refill the water reservoir with usedhot water or the used descaling mixture.• The machine is ready for the rinsing cyclewhen the on/off light lights up continuously.4 Press the CLEAN/CALC CLEAN button torinse the machine. (Fig. 50)• During the rinsing cycle, the indicatorson the control panel on the lid light upanticlockwise sequentially to indicate thatthe machine is rinsing.D Note:The rinsing cycle takes a few minutes.5 Repeat steps 1 to 4 one more time.ENGLISH