Philips SAECO Xelsis SM7786 User Manual

Also see for SAECO Xelsis SM7680: User manual

Problem Cause SolutionYou did not install theAquaClean filter during firstinstallation, but after havingbrewed approx. 25 coffees(based on 100ml/3oz cups). Themachine has to be completelylimescale-free before youinstall the AquaClean filter.First descale the machine and theninstall a new AquaClean filter. Afterdescaling, the filter counter is reset to0/8. Always confirm filter activation inthe machine menu. Also do this afterfilter replacement.The new water filter doesnot fit.You are trying to install anotherfilter than the AquaClean filter.Only the AquaClean filter fits into themachine.The machine is making anoise.It is normal that your machinemakes noise during use.If the machine starts to make a differentkind of noise, clean the brew group andlubricate it (see 'Lubricating the brewgroup').The AquaClean filter was notprepared properly and air isnow drawn into the machine.Remove the AquaClean filter from thewater tank. Shake the filter for about 5seconds. Immerse the filter upsidedown in a jug with cold water for atleast 30 seconds. Wait until no more airbubbles come out. Place the preparedAquaClean filter back into the watertank. Then dispense 2-3 cups of hotwater.Technical specificationsThe manufacturer reserves the right to improve the technical specifications of the product. All thepreset quantities are approximate.Description ValueSize (w x h x d) 283 x 393 x 489 mmWeight 10.8 - 12.2 kgPower cord length 1200 mmWater tank 1.7 litres, removableCoffee bean hopper capacity 450 gCoffee grounds container capacity 14 pucksMilk carafe capacity 600 mlAdjustable spout height 75-148 mmNominal voltage - Power rating - Power supply See data plate on inside of service door21EnglishEnglish