MAIN MENU QC40198/QC40196 User Manual48 | P a g e5.3.1 GeneralGeneral setting includes the following items. See 57HFigure 5-3X.Figure 5-3 System time: Here is where you set system time Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY. Date separator: There are three options to separate date: dot, beeline and solidus. DST: Here you can set DST time and date. Enable DST function and then click set button. You will see aninterface shown in X358H358H358HFigure 5-4X.Figure 5-4Here you can set start time and end time by setting corresponding week setup. In X359H359H359HFigure 5-4X, enable date button,you can see the interface shown in X360H 360H 360HFigure 5-5X. Here you can set start time and end time by setting correspondingdate setup.Figure 5-5 Time format: There are two types: 24-hour mode or 12-hour mode.
