Q-See QC40198 User Manual

Also see for QC40196: User manual Quick installation guide Quick installation guide

Contents

Q-See QC40198 User Manual Manual pdf 59 page image

MAIN MENU QC40198/QC40196 User Manual50 | P a g eNote:If the 1-channel resolution is D1and the frame rate is more than 6f/s, then the other 15 channels (the secondchannel to the sixteenth channel) resolution shall be CIF or QCIF.If the 1-channel resolution is D1 and the frame rate is or less than 6f/s, then the other 15 channels (the secondchannel to the sixteenth channel) resolution shall be D1/CIF/QCIF. Right now in D1 resolution, the max frame rateis 6f/s on more than one channel. Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video quality. Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image quality. Video/audio: You can enable or disable the video/audio. Overlay: Click overlay button, you can see the interface shown in X362H 362H 362HFigure 5-7XFigure 5-7 Cover area (Privacy mask): Here you can set privacy mask sections. You can drag your mouse to set sectionsize. In one channel video, system supports up to 4 zones. Preview/monitor: privacy mask has two types. Preview and Monitor. Preview means the privacy mask zonecannot be viewed by user when system is in preview status. Monitor means the privacy mask zone cannot beviewed by the user when system is in monitor status. Time display: You can select for the system to display time or not when you playback. Click set button and thendrag the title to the corresponding position in the screen. Channel display: You can select whether system displays channel number or not when you playback. Click setbutton and then drag the title to the corresponding position in the screen.5.3.3 SchedulePlease refer to chapter 4.4 schedule.