Q-See QC40198 User Manual
Also see for QC40196: User manualQuick installation guideQuick installation guide
                                                                                                                                             | |
Contents
| 
MAIN MENU QC40198/QC40196 User Manual67 | P a g e5.6.1 HDD InformationHere is listed hard drive type, total space, free space, video start time and status. See X391H391H391HFigure 5-36.Figure 5-36“○” means current HDD is normal. “X” means there is an error. “-“ means there is no HDD.If disk is damaged, system shows a “?”. Please remove the damaged hard drive before you add a new one.If there is a hard drive problem, check if hard drive time and system time correspond. Please go to setting thengeneral to modify system time, then reboot the system to solve this problem.After system boots up, if there is any problem, system goes to HDD information interface directly. Please note,system does not ask you to force a solution.When HDD problem occurs, you can check to see if system time and HDD time are identical or not. If they are notidentical, please go to General (Chapter 5.3.1) to adjust system time or go to HDD Management (Chapter 5.5.1) toformat HDD and then reboot the combo DVR.Tips:Please click Fn button or left click mouse to view HDD record time and HDD type and time.5.6.2 BPSHere is where you view current video data stream (KB/s) and occupied hard drive storage (MB/h). See X392H392H 392H Figure 5-37.Figure 5-37 |
Related manuals for Q-See QC40196
manualsdatabase
Your AI-powered manual search engine