Q-See QSD6209C9-250 User Manual
Also see for QSD6209C9--250: Quick installation guide
                           | |
Contents
| 
9hard drive, it will erase all the data recorded on the first hard drive.(5) SLAVE HDD SIZE: This shows the space available on the secondary hard drive in the DVR.(6) SLAVE HDD USED: This shows the space used on the secondary hard drive for recording.(7) SLAVE HDD FORMAT: If you format this hard drive it will erase all the data recorded on the secondaryhard drive.(8) Hard Disk Drive FormatWhen you press the “SELECT” key you will be prompted to input a Password when the hard drive formatmenu appears.Type Password (6) ::――――――When you key in the correct password the following message will flash 3 times:“password correctHard Disk Formatting…”Otherwise the following error message will be displayed on the screen:“Password Incorrect”[Note] The Factory Default password is 111111.5.8 Miscellaneous Setup5.8.1 Password ChangeThis option allows you to change the system password.The password must be composed with six characters.All keys can be used as a password key except the[MENU] key, which is used to exit.[NOTE] The Factory Default Password is 111111.MISCELLANEOUS SETUPPASSWORD CHANGEDSET TIMEHIDDEN CHANNEL [OFF]AUDIO PORT SETUPPTZ SETUPIMAGE PARAMETERSPASSWORD ENABLE [OFF]VGA SETUP 800X600 60HZ( ) MOVE (SEL)SELECT (MENU) EXITCURRENT PASSWORDNEW PASSWORDCONFIRM PASSWORD[------][------][------] |
Related manuals for Q-See QSD6209C9--250
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine