Q-See QSD6209C9-250 User Manual
Also see for QSD6209C9--250: Quick installation guide
                           | |
Contents
| 
11For Example:The hardware setup for the above screen is shown on theleft.5.8.5 PTZ SetupThis DVR can control speed dome cameras (PTZ) whichare connected to the DVR.SPEED: Set the band rate of each channel (4800, 9600,19200, or 38400)PROTOCOL: Select PELCO-P or PELCO-D protocol.CAMERA&ID: Select the camera (1-4); ID set (1-32)5.8.6 Image ParametersCON: press left or right button of remote control to setimage contrast valueBRI: press left or right button of remote control to setimage brightness valueHue: press left or right button of remote control to setimage hue valueSAT: press left or right button of remote control to setimage saturation valuePTZ SETUPSPEEDPROTOCOLCAMERA-[ 1 ]( ) MOVE ( )CAM ID(SEL)SELECT (MENU)EXITCAMERA1CONBRIHUESAT( )MOVE ( ) + ( ) - (MENU) EXIT[4800 ][PELCO-D]ID-[ 1 ]64%64%64%64% |
Related manuals for Q-See QSD6209C9--250
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine