Q-See QSD6209C9-250 User Manual
Also see for QSD6209C9--250: Quick installation guide
                           | |
Contents
| 
4Chapter 3: Installation3. Install Fixed Hard Drive (Fig1)NOTICE: Do not remove HDD while DVR is running.I. Remove the DVR cover carefully.II. Connect the power cord and data cable to HDD.III. Use the provided screws to fix hard drive on therack, and then replace the cover.3.1 Connect Cameras and MonitorThere are 9 camera inputs and 1 monitor output (BNCconnectors).3.2 VGA OutputThere is 1 CRT or LCD monitor output with VGA connector.Chapter 4: DVR System Boot4. DVR System Boot4.1 Display DVR Firmware Version4.2 Detecting Installed Hard DriveAfter connecting the power and turning on the powerswitch the system will boot-up and display the version andrelease date of the DVR firmware.DVR will detect the installed hard drive and display thehard drive information.Fig1V1.9V-EN2008.3.20CHECKING HDD……MASTER [WDCWD3200AAJB-00T]SLAVE…… |
Related manuals for Q-See QSD6209C9--250
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine