QCT QuantaMesh Installation Manual

Contents

QCT QuantaMesh Installation Manual Manual pdf 35 page image

Network Switch lnstallation Guide 35QuantaMesh T5000 SeriesPorts of T5032-LY6The switch chassis is equipped with the following ports:• 32 QSFP+ ports (40-Gigabit Ethernet uplink ports)• 1 Management ports• 1 Console port• 1 USB portThe chassis has 32 QSFP+ ports. Each of these ports uses an optical transceiver, active opticalcables, or direct-attached cable to connect the QSFP+ port to the hosts (uplink connections). Formore information on obtaining the appropriate QSFP+ modules, refer to “Supported Cables andTransceivers” on page 35.One management port enables you to manage the switch operation using an RJ-45 Ethernetcable.One console port enables you to perform the initial configuration by connecting to a PC with theRJ-45 to DB-9 serial adapter cable.*One USB port enables you to load the configuration files from a USB storage device to theswitch’s flash memory.NOTE:• *The USB port function will be supported in the future release.Data Port ConnectionSupported Cables and TransceiversSee the following table for the list of supported cables and transceivers.SupportedDistance Description Note1m 40G Direct Attach Copper (DAC) cable QSFP+ to QSFP+40G DAC Fan Out cable QSFP+ to 4 SFP+3m 40G Direct Attach Copper (DAC) cable QSFP+ to QSFP+40G DAC Fan Out cable QSFP+ to 4 SFP+5m 40G Direct Attach Copper (DAC) cable QSFP+ to QSFP+40G DAC Fan Out cable QSFP+ to 4 SFP+7m 40G Active Optical Cable (AOC) QSFP+ to QSFP+,850 nm, MMF10m 40G Active Optical Cable (AOC) QSFP+ to QSFP+,850 nm, MMF20m 40G Active Optical Cable (AOC) QSFP+ to QSFP+,850 nm, MMF> 20m 40GBASE-SR4 QSFP+ Transceiver Optic (MPO) QSFP+, 850nm,MMFUp to 10km 40GBASE-LR4 QSFP+ Transceiver Optic (LC) QSFP+, SMFNOTE:• For more information about the cable/transceiver, please contact QCT sales.