QNAP TS-269 Pro Software User Manual

Contents

QNAP TS-269 Pro Software User Manual Manual pdf 21 page image

212.2.1 Online InstallationFollow the steps in this section to complete online installation for your NAS:1. Go to http://start.qnap.com and click "Start Now".2. Choose the number of HDD bays and the model of your NAS and click "Next".3. Connect the network and power cables of your NAS, turn on the Turbo NAS andclick "Next".4. Click the operating system your computer is running on.5. Click "Get Qfinder" to download the QNAP Qfinder utility (For Mac users, please skipto Step 19 .)6. Launch the QNAP Qfinder installer from your computer and click "Next".7. Read the license agreement, check "I accept the terms of the License Agreement,"and click "Next".8. Click "Next".9. Click "Install".10.Click "Finish".11.Launch the QNAP Qfinder from your desktop.12.The Quick Setup Wizard will be launched automatically. Please confirm that the IPaddress shown up on the dialog window matches the Turbo NAS you are trying toconfigure (please check the MAC address from the QNAP Qfinder and itscorresponding IP address.) Click "Yes" to configure your Turbo NAS.13.Click "Quick Setup".14.Install a hard drive on your Turbo NAS if you have not already done so and click"Detect Again".15.Confirm the setup details and click "Next".16.The wizard will proceed to finish the installation process.17.Click "Finish" to complete the installation process and open the NAS login page.18.Key in the user ID and password entered in the "Confirm the setup information"page.19.Click "Get Qfinder" to download the QNAP Qfinder utility (Steps 19 to 23 are for Macusers.)20.Install the QNAP Qfinder.21.Execute the QNAP Qfinder and connect to the NAS.22.Start the Web Installation step.23.Key in the user ID and password entered in the "Confirm the setup information"page.21