QSC TouchMix-8 User Manual
Also see for TouchMix: Pocket reference guideApplication guideQuick start guideTechnical notesApplication guide
                                                                       | |
Contents
| 
50TD-000472-00-AMixer SetupGlobal and Utility FunctionsPressMenuMenu MixerSetupPressMixer SetupNOTE: — Figure 51 refers to the TouchMix, — Figure 52 refers to the iPad App.1. Display Brightness Knob – Controls the brightness of the LCD screen and the illuminated buttons on the TouchMix.2. Solo Mode Switch – Changes the Cue pick-off point to pre-fader listen (PFL), or after-fader listen (AFL).3. Sample Rate Switch – Selects the sample frequency (bit rate) for the mixer. Most relevant for recording. Typically, 44100 is used for audio CD,and 48000 for audio with video.4. Demo Mode Switch – Demo mode provides a slide show that highlights some of the TouchMix features.5. Clear Storage Button – Deletes all user-defined presets and scenes from the mixer. Does not delete presets or scenes stored on a USB device.6. Software Version Label – Displays the version number of the currently installed firmware.7. Upgrade Button – When QSC makes an update to the TouchMix firmware, you can download it from the QSC website and onto a USB device.After inserting the USB device into the TouchMix, touch the Upgrade button to start the process. Follow the instructions on screen.8. End User License Agreement – Please read this agreement before using your TouchMix.9. Save System Log to USB Button – The TouchMix saves various events that take place when the TouchMix is on. This log can be saved to a USBdevice then sent to QSC Technical Support for use in troubleshooting TouchMix system errors. This fi le requires special software to read it.10. Reset Network Button – Pressing this button reloads the Wi-Fi network driver. Use this if you are having trouble connecting your iPad(s). If anyiPads are connected, they must be reconnected after the reset.11. Mixer Name (Network SSID) Field – Displays the name of the mixer’s network. Touch the Name to display a keyboard and enter a new SSID.12. Network Password Field – Displays the password for the network to which your iPad connects. Touch the Name to display a keyboard that maybe used to enter a Password for the network. The password must be numeric; 0-9 only, and must be 10 characters.13. Reset Mixer Button – Restores factory settings but retains user presets, scenes, SSID and Network Password.— Figure 51 —End User License Agreement Save System Log to USBReset Network21335104168911 127— Figure 52 —283513 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine