QSC TouchMix-8 User Manual
Also see for TouchMix: Pocket reference guideApplication guideQuick start guideTechnical notesApplication guide
                                                                       | |
Contents
| 
57TD-000472-00-ARecord / PlaybackMain ScreenIMPORTANT: All USB memory devices must be formatted as FAT32 to work with TouchMix. Drive performance is critical for recording.For more information and to see a list of qualifi ed drives, visit qsc.com. At this time, the TouchMix does not support importing orre-importing digital audio files that have been created or edited on another device.NOTE: All the standard channel controls act as they doregardless of record / playback status. For example, if you Mutethe channel that is recording, the output gets muted, butrecording of the input continues.1. Bank Selectors – You must have an Input Channel bank selected to setuprecording or playback.2. Track Indicator – Indicates that a recorded track is the audio source forthe channel. Displays here and on the Home screen.3. Armed Indicator – Indicates that the channel is armed for recording.Displays here and on the Home screen.4. Track Source Switch – Selects analog input (left) or track (right) for theaudio source of the channel.5. Arm Button – Engage to select a channel to be recorded.6. New/Recall Session Button/Label – Navigates to the Recording Setupscreen where sessions and recording utility functions may be managed. Inaddition, the name of the currently active Session is displayed.7. Transport Control Buttons – Standard controls. To record and playbackat the same time, arm the inputs you want to record, select Track for thetracks you want to playback, then touch the Play button.8. Time Code Display – Displays position of the Play pointer in HH:MM:SS. Maximum record time is determined by the capacity of the attachedhard-disc drive.NOTE: Due to a file size limitation, the max continuous recording time is roughly three hours. You will receive a message that you areapproaching this limit approximately 10 minutes beforehand. You may work around this by stopping the recording at a logical point(between sets), and restart the recording at any time.9. Time Line – Represents the session time line.10. Play Pointer – Indicates current record/playback position.11. Locate Pointer – The Locate pointer holds a set place on the Time Line to which the Play pointer can be relocated.a. Position the Play pointer.b. Touch the Set button.c. Touch Go To to return to that spot.12. Go To Button – Repositions the Play pointer to the position of the Locate pointer.13. Total Record Time Counter – The total length of the recording in HH:MM:SS. If recording is in progress, this number grows until the recordingis ended.14. Set – Marks the current location of the Play pointer and moves the Locate pointer to that position.PressRecord / PlayRecord/Play— Figure 60 —21743569 10 11 13 14812 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine