Qimova chair | User manualVersion 1.10 | Page 17 af 48No. Item Description10 On/Off Button To turn the power on, press the On/Off button. The currentbattery charge will be indicated and the System Status LEDwill illuminate and not flash.12 Right Indicator To turn the Right Indicator on/off, press and release (‘ashort press’) the Right Indicator button. To toggle theHazard Lights on/off, press and hold (a ‘long press’) theRight Indicator button.13 Horn Pressing the Horn button will sound the horn for as long asthe button is pressed.14 Left Indicator To turn the Left Indicator on/off, press and release (‘ashort press’) the Left Indicator button. To toggle theHazard Lights on/off, press and hold (‘a long press’) theLeft Indicator button.15 Mode Each press of the Mode button will increment the DriveProfile, up to the maximum configured value and then backto profile 1. the current Drive Profile will be shown in the 7Segment Display16 ASK (AccessoryShortcut Key)If you are in Drive Mode, pressing the ASK button willnavigate you to the last used accessory function, e.g.actuator control. If you are already in Accessory Mode,pressing ASK will take you to the next available mode, e.g.ECU or lighting.To return to Driving, simply press the Mode button.If the chair is driven and the ASK button is pressed, thecommand is ignored until the chair has stopped.3.2.1 REMG90A Jack SocketsJack Sockets are provided on the Master Remote for accessing On/Off and Mode functionsvia third party switches. These connections are protected by a screw down cover and areclearly labelled. When third party switches are connected, ensure the wiring is routedproperly to exit from the notches in the cover. Depending on the dimensions of the jackplugs used, the jack plugs may be oriented in either of the two ways as shown on Figure 5.Figure 5