Qimova PE-L User Manual
                                                | |
Contents
| 
Qimova chair | User manualVersion 1.10 | Page 41 af 489.3 Packing for shipment or storagePlease follow the instructions below prior to shipment or storage of the wheelchair.Packing the chairWhen preparing the power chairfor shipment or storage, dismantlethe battery cable with large fusebetween batteries.Figure 41.Then follow these packingprocedures:Unplug the securement pin (1) atarm on the backrest and dismantlepushing handle (2) as well.Remove leg rests (3) and armrest(4) to reduce space.Incline the backrest and place legrests as shown.Figure 39.Figure 3910 Cleaning and maintenanceNOTE:Do not clean the wheelchair with a high-pressure cleaner as this can cause short circuiting.10.1 Protective /incontinence coverIt is recommended that protective covers are used on the seat and armrests. Protective-and incontinence covers are tailored to fit the seat cushion. They are fixed to the seat bystretching the fabric a little to get the cover in the right position over the cushion. On someseat cushions there are Velcro strips on the sides of the seat cushion and on the inside ofthe covers, but generally these are not necessary to hold the cover in the correct position.10.2 Washing instructions for upholstery10.2.1 UpholsteryWashing and ironing the upholstery is not possible as it damages the inflammable coating.For cleaning of dry stains just brush with a smooth brush, for fluid staining, absorb thestaining with an absorptive cloth and avoid contact with any liquids.Using any liquids on the upholstery can ruin the inflammable coating of the fabric. |
Related manuals for Qimova PE-L
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine