1–Getting StartedConnecting the Management Workstation to the Router1-4 ISR654602-00 DUpdating the FirmwareThe router comes with current firmware installed. You can upgrade the firmwarefrom the management workstation as new firmware becomes available. You canupdate the firmware on one or more router blades either using CLI commands orSANsurfer iSCSI/FC Router Manager.To update the firmware using iSCSI/FC Router Manager:1. Download the most recent iSR6200 firmware version to your workstationfrom the QLogic Web site:http:// driverdownloads.qlogic.com2. Check the current firmware version as follows:a. Start SANsurfer iSCSI/FC Router Manager and connect to theiSR6200 router.b. Select the Router iSR6200 node in the system tree view.c. On the Router iSR6200 page under Blade x Information, review theSoftware Version. If the current revision is what you want to replace,continue with Step 3.3. Launch the FW Update Wizard using one of the following methods: On the Wizards menu, click FW Update Wizard. Press CTRL+P.4. On the Router Selection dialog box, select the check box corresponding tothe router blade (specified by IP address) to update, and then click Next.5. Complete the Firmware File Selection dialog box as follows:a. Click Browse, and then navigate to the folder where you saved thefirmware files.b. In the Open dialog box, click the appropriateisr-6200-x_x_x_x.bin file (where x_x_x_x identifies thefirmware version), and then click Open.c. When the selected firmware file name appears in the Firmware ImageFile box, click Next.NOTE:When running the Configuration Wizard, click the Help button to viewrelated help topics.
